El Paso, TX Appliance Air Conditioning Heating Repair and Service
El Paso, TX Appliance, Air Conditioning and Heating Repair
El Paso TX Appliance Repair
HOME BRANDS WE REPAIR WARRANTY PRICES AREAS WE SERVICE TESTIMONIALS CONTACT US
 
Home > El Paso, TX Dryer Repair

If your dryer is dead or doesn't get hot or it just doesn’t work as use to be you need professional dryer repair help.  Simply call our local number and we will take care of the rest. We are available 24/7 for El Paso, TX dryer Repair at:

915 261-0601

Please note: We Don't Sell Parts and Buy or Sell Used Dryers.

Also,

We don’t work on small appliances such as vacuum cleaners, sewing machines etc. We work only on major appliances such as washers, dryers, refrigerators, ovens, stoves, dishwashers etc.

We service and repair all dryer brands:

Whirlpool
Maytag
Jenn Air
Hotpoint
GE
Frigidaire

Kitchen Aid
Admiral
LG
Sub Zero
Thermador
Magic Chef

Sears
White Westinghouse
Tappan
Speed Queen
Roper
and many more view the rest


You can schedule your same day El Paso, TX dryer appointment simply by calling us at:

915 261-0601

Or via email. Please include your name, phone number and brief explanation of the problem you are experiencing with your dryer. As soon as we receive the email we will notify you to schedule your appointment for El Paso, TX dryer repair.

Our dryer repair area includes all of El Paso, TX and the surrounding cities that are listed below:

El Paso
Sparks
Horizon City
Santa Teresa
Socorro
Juarez
Cazadores
Juarenses
Maestros

Fort Bliss
Vista Hills
San Elizario
Loma Linda
Centro
Partido Romero
Holgun
Fuentes Los Nogales
Galeana

Rancho Palo Chino
Socoro
Saragoza
Manhattan Heights
Ridgecrest
Frontera
Las Palomas
Tejas
view the rest service areas

The information below is designed to provide how to increase the life of your dryer and use it in the most efficient way, so that will save you money from utiliy bills and future El Paso, TX dryer repairs. It is posted with the understanding that we are not offering advice that you do dryer repairs on your own. If dryer repair expert assistance is required, the services of competent professionals in El Paso, TX are available 24/7 at our local phone number.

915 261-0601

Mechanical and Electrical Dryer Repair

The following information describes the procedures used to test and repair the mechanical and electrical components of clothes dryer.

Electrical Dryer Checks
Warning: To avoid electrical shock, disconnect the power supply before testing any component. When testing the drive motor, be sure that the motor and test cord are grounded. General the recommended method to check electrical component, is with the aid of a volt. When testing a component, remove the wires that are connected to it. The producing electrical components such as motors, solenoid coils, and healers will show tile resistance of the circuit in ohms. Contacts that are closed in timers or switches should not show any appreciable resistance between the terminals. By following a timer chart and positioning the timer in a given cycle, the timer contacts can be checked. Switch charts show opened and closed Contacts in the various selector switch positions. These charts should be followed when testing a switch.
Motor circuit Electric and gas dryers when diagnosing an electrical problem, always keep in mind the current flow needed to operate a dryer motor (120 volts). The electrical current must go through the power supply circuit protector (fuse or circuit breaker), dour switch the moment switch in conjunction with the internal motor switch, the timer, selector switch, and the motor thermal overload protector.

To test the drive motor, use the following procedure:
1. Mark the location or color code of the lead wires. Remove any external power source leads from the motor. Do not remove the internal motor leads to tile motor switch.
2. With an external 120-volt ac dryer grounded power supply, connect the wires to terminals. The motor should run. If it does not run, remove the motor from the unit.
3. Oil open-framed motors, make continuity test on the motor leads, terminals switch, and between terminals I and 5 of the switch. If an open circuit is indicated on either test, replace the Switch and repeat the above tests.
4. To test terminal 5, connect the 120-volt power leads to terminals 1 and 3. Apply power, and at the same time, jumper terminals and 5 just long enough to bring the motor up to speed. Remove the juniper. The motor should continue to operate with the leads on terminals 1 anti 5. If the motor slops, replace the switch.

If expert dryer repair assistance is required, the services of competent professionals are available 24/7 at our local phone number.

915 261-0601