Home > Diswasher Repair El Paso, TX

If your dishwasher is leaking or doesn't drain the water or it just doesn’t work as use to be you need professional dishwasher repair help.  Simply call our local number and we will take care of the rest. We are available 24/7 for El Paso, TX dishwasher Repair at:

915 261-0601

Please note: We Don't Sell Parts and Buy or Sell Used Dishwashers.

Also,

We don’t work on small appliances such as vacuum cleaners, sewing machines etc. We work only on major appliances such as washers, dryers, refrigerators, ovens, stoves, dishwashers etc.

We service and repair all dishwasher brands:

You can schedule your same day El Paso, TX dishwasher appointment simply by calling us at:

915 261-0601

Or via email. Please include your name, phone number and brief explanation of the problem you are experiencing with your dishwasher. As soon as we receive the email we will notify you to schedule your appointment for El Paso, TX dishwasher repair.

Our dishwasher repair area includes all of El Paso, TX and the surrounding cities that are listed below:

The information below is designed to provide how to increase the life of your dishwasher and use it in the most efficient way, so that will save you money from utiliy bills and future El Paso, TX dishwasher repairs. It is posted with the understanding that we are not offering advice that you do dishwasher repairs on your own. If dishwasher repair expert assistance is required, the services of competent professionals in El Paso, TX are available 24/7 at our local phone number.

915 261-0601

Dishwashers Installation
Connect the water supply
1. Install approved tubing or pipe to the water valve. Connection to the valve is 8' inch pipe thread.
2. Use thread-sealing compound or Teflon tape on all threaded connections. The water line must be free of all scale, burrs, chips, and lubricant before connecting it to the valve.
3. Keep the valve from twisting when making the water pipe connection by grasping the brass insert of the water valve with water pump pliers.

Caution:
1. Do not overheat the inlet valve when soldering connections. Overheating will damage the internal parts.
2. Use care to see that no thread compound, thread chips, or foreign material can enter the valve.
3. If the valve clogs with foreign material, remove the four screws at the inlet end of the valve for access to the filter screen.
4. The valve inlet connection is 8 inch pipe thread.
Connect the drain hose to the house drainage system. Attach the hose to the dishwasher the discharge end of the drain hose supplied with the dishwasher can be used. Cut the drain hose at the right ridge on the coupler. Do not cut this hose to shorten it. Coil any excess under the cabinet or in the shaded area. Reverse the ends of the drain hose when connecting it to an air gap. The small end goes on the air gap the bigger will connect to the dishwasher.
Important note: If the drain line goes to a separate trap beneath the floor, make sure that the trap is vented to prevent siphoning. Install an air gap at the countertop level. The air gap is available at plumbing supply houses and hardware stores.

Connect the dishwasher electricity
1. Armored or BX cable must not be allowed in contact with any electrical connections,
2. Provide a separate 15-amp, 120-volt ac, circuit using a 15-amp time-delay fuse or a 15-amp breaker.
3. A 20-amp circuit is required if the dishwasher is installed on the same branch circuit as the garbage disposer.
4. Use only approved wiring connections and wire
5. Connect the white wire from the dishwasher to the white wire.
6. Connect the black wire from the dishwasher to the incoming black wire. Connect the incoming ground wire (bare or green conductor) to the green grounding screw on the unit.

Caution: The joining of aluminum building wire to stranded copper wire involves special procedures, and should be done by qualified personnel.

If expert dishwasher repair assistance is required, the services of competent professionals are available 24/7 at our local phone number.

915 261-0601